Buy a "Front Panel Extension Cable Kit" or a "Breakout Adapter" (available on Amazon or eBay for $5-$10). These adapters split the single block into individual 2-pin plugs, allowing you to map them to the N15235 pinout manually.
| Pin | Signal | Function | Wire Color (Typical) | | :--- | :--- | :--- | :--- | | | +5V | Power LED (+) | Green / White | | 3 | GND | Power LED (-) | White | | 5 | HDD+ | HDD LED (+) | Red / Orange | | 7 | GND | HDD LED (-) | White / Black | | 9 | GND | Key / No pin | N/A | | 2 | PWR_BTN+ | Power Switch | Orange / Blue | | 4 | GND | Power Switch Ground | White | | 6 | RESET+ | Reset Switch | Blue / Yellow | | 8 | GND | Reset Ground | White |
The front panel header consists of a 10-pin block grid layout with (Pin 10) on the top right, acting as a visual alignment key. The grid is divided into two rows: the top row has odd numbers, and the bottom row has even numbers. Pin Number Connection Label Pin 1 Hard Drive Activity LED Positive (+) Pin 3 Hard Drive Activity LED Negative (-) Pin 5 Reset Switch Neutral / Ground Pin 7 Reset Switch Neutral / Ground Pin 9 Unused / Reserved Pin 2 Power Indicator LED Positive (+) Pin 4 Power Indicator LED Negative (-) Pin 6 Power Switch Neutral / Ground Pin 8 Power Switch Neutral / Ground Pin 10 Missing Pin Empty / Key Step-by-Step Connection Instructions 1. Locating the Header Foxconn N15235 Front Panel Connectors - Google
⭐⭐☆☆☆ (2/5 – Functional but frustrating due to non-standard layout )
: Located on Pins 6 and 8 . This is the most critical connection; touching these two pins with a screwdriver can boot the system without a case. Polarity does not matter. Buy a "Front Panel Extension Cable Kit" or
For most N15235 variants, the front panel header follows a standard layout. Here is the pin breakdown (viewing the header with the pins sticking up, top row 1-9, bottom row 2-10): Description HDD LED+ Hard Drive Activity LED (Positive) 2 Power LED+ System Power LED (Positive) 3 HDD LED- Hard Drive Activity LED (Negative) 4 Power LED- System Power LED (Negative) 5 Reset SW- Reset Switch (Negative) 6 Power SW+ Power Switch (Positive) 7 Reset SW+ Reset Switch (Positive) 8 Power SW- Power Switch (Negative) 9 Reserved/NC Not Connected 10 Empty/NC Keyed/Empty Pin Key to Connecting:
Do not trust the wire color alone! Always assume red is positive (+), but sometimes manufacturers swap them. Use the pinout diagram below as your source of truth. The grid is divided into two rows: the
Disclaimer: Connecting wires incorrectly can damage the motherboard. Always re-verify pin positions before turning on the power.
Scan the of the Foxconn N15235 motherboard.