Sie sind nicht angemeldet.

While a low battery usually triggers a blinking display or a "B" icon, a critically low or fluctuating battery can cause erratic microprocessor behavior. This can lead to false communication errors during data transfer attempts. Step-by-Step Troubleshooting and Solutions

Mitutoyo uses an . The slider reads a unique pattern embedded along the beam to determine its exact position. When this reading process is interrupted, corrupted, or misaligned, the internal circuit triggers the E--05 safety code to prevent inaccurate measurements from being displayed. Primary Causes of the E--05 Error

Before you panic and buy a new $200 caliper, understand why this happens. There are four main culprits:

Ensure the slider moves smoothly. Any "grittiness" suggests a physical obstruction or bent scale.

The representative provided John with a step-by-step guide to update the caliper's firmware, which involved downloading a software update from the Mitutoyo website and transferring it to the caliper using a special cable. John followed the instructions carefully and was relieved to find that the update resolved the issue.

Fortunately, you do not need to replace your expensive tools immediately. Most occurrences of this error can be solved right at your workbench. Root Causes of the E--05 Error

Understanding and Fixing the Mitutoyo Caliper "E--05" Error Code

Even a microscopic film of oil, coolant, or dust can cause an E--05. Use a soft, dry, lint-free cloth (microfiber is best).

Finding an near your location

Ensure the battery contacts are clean and free of corrosion. Perform a Hard Reset

If the environment is damp, dry the tool thoroughly with compressed air or a hair dryer on a setting. 4. Battery Health

If the error persists despite cleaning, the encoder unit itself may be damaged internally, likely requiring professional service from Mitutoyo. Proactive Prevention

Remove the screws on the back of the sliding unit.