V2.71 Download Exclusive | Rkdevtool
(v4.5 or newer) installed so your PC recognizes the device in "Rockusb" mode. Run as Admin : Right-click RKDevTool.exe and select Run as Administrator to ensure it has permission to access USB ports. Language Configuration : If the tool opens in Chinese, open the config.ini file in the tool's folder and change Selected=1 (Chinese) to Selected=2 (English) under the [Language] Connect Device
: Provides deep memory wipe options to clean out bad sectors or corrupt partition tables before pushing a clean OS layout. System Requirements & Prerequisites
RKDevTool cannot discover your device over USB without the proper Rockchip USB drivers. RKDevTool (All Version) Download
Always remember to , use a good USB data cable , and never interrupt the flash process . Rkdevtool V2.71 Download
To flash firmware, your device must be connected to the PC in or Maskrom Mode . Power off your Rockchip device completely.
Once the process reaches 100%, the status log will display . Your device will automatically reboot into its new operating system. The first boot may take up to 5–10 minutes. Troubleshooting Common Errors Error: "No Devices Found"
This tab is for flashing a complete, ready-to-use firmware package (usually a single .img file) to the device. Power off your Rockchip device completely
The UI is clean, intuitive, and less cluttered than newer iterations. Key functions—e.g., “Download Image,” “EraseFlash,” “Run,” “Switch” —are upfront, reducing the risk of accidental partition corruption.
RKDevTool is designed specifically for devices running on Rockchip processors (e.g., RK3399, RK3288, RK3368, RK3568, etc.). It communicates directly with the device’s bootloader to write image files directly to the NAND flash or eMMC storage.
No, RKDevTool is a native Windows GUI application. For macOS and Linux, use the command-line tool rkdeveloptool . ” “Switch” —are upfront
: The standard mode for updating firmware. The tool will display "Found One LOADER Device" at the bottom. Maskrom Mode
Browse and select your downloaded .img firmware file. The tool will parse the image and display the version information.
There are two primary modes to flash firmware: (for .img files) and Download Image Mode (for flashing specific partitions). Method 1: Using "Upgrade Firmware" (Single Image File) Run RKDevTool.exe .
Maskrom is a low-level recovery mode that exists inside the Rockchip chip itself. This mode is from the chip’s internal ROM (Read-Only Memory).
